Intuition / LINER ARCHIVE / Current
Intuition Skate Premium
Dual-density foam liner with removable cuff reinforcement and heel wedge. Intuition lists the shell families below; correct liner size and shell space still need checking. 'Seba CJ2' compatibility is limited to the liner-less version.

[ THE RECORD ]
Volume, support & construction
- Brand
- Intuition
- Catalog status
- Current
- Volume
- Unconfirmed
- Support
- Stiff removable cuff, reinforced tongue and internal J-bars
- Heat claim
- Yes — named in Intuition’s manufacturer fitting instructions
- Pairing evidence
- Manufacturer-listed
Recorded uses: Firm tongue support / Heel retention / Heat molding
[ FIT NOTES ]
Size labels & fit
The manufacturer lists compatible shell families rather than exact size pairings. Current replacement parts include Black overlays, Jungle Cat/Moss Green/Hawt Pink cuff kits with laces, and 8 mm heel wedges. Those are accessories, not separate liner editions.
[ FIT REFERENCE ]
Sizing & Mondo
Heel seating, lacing & fitting accessories →
Make sense of skate sizes · mm, Mondo, US, EU, UK & shell sizes
Start with your actual foot measurements. Use the chart for the exact skate, generation and liner package you intend to buy.
| What you see | What to check |
|---|---|
| Foot length · mm / cm / inches | These are measurements, not shoe sizes. 288 mm = 28.8 cm. One inch is 25.4 mm. Keep both feet separately and use the longer one. |
| MP / Mondo / CM / JP | Preserve the manufacturer’s printed units and meaning. A nominal size label is separate from a recommended foot-length column. A number such as 28.5 must not be mistaken for 28.5 mm. |
| US men / US women / youth | These are different scales. A generic “US” entry stays unspecified unless its source identifies the scale. Unisex marketing does not establish which scale the seller uses. |
| EU / UK / regional labels | Read the exact chart’s column. Do not apply a universal conversion from everyday shoes or another skate brand; ask the seller which scale an unlabeled number uses. |
| Dual sizes / shared shells / XS–XL | Two retail sizes can share one shell while their liners or inserts differ. Letter sizes and names such as Shmedium belong to that model’s chart. Check the shell stamp and liner label separately. |
| Junior / adjustable skates | A labeled size range is not automatically a measured foot range. Verify the exact adjustable model, its current setting and any supplied sizing insert. |
| Shell / liner / insole dimensions | Empty-shell length and width, liner interior length and insole length are different measurements. None alone tells you how much usable room your foot has in the assembled skate. |
Length is the first check.
Check forefoot width, instep height, heel hold, socks and footbeds too. Width and instep entries are saved for fitting discussions; the Archive does not invent wearable volume limits. Used liners, replacement liners and different packages need their own review.
Only apply an allowance when the exact chart instructs it. A chart adjustment changes that chart lookup, not your saved foot measurements or the rest of the app. Do not add extra room twice or assume every half size uses a different shell.
FR model-specific sizing ↗ · Intuition size scales ↗ · THEM shell labels ↗ · Razors shell dimensions ↗
Intuition Skate Premium — current official chart
Manufacturer instruction: The current page says to size up on a half size; its example is 27.5 → 28. Confirm the selected band and actual shell together.
Add your foot length
Enter both feet; the finder uses the longer measurement.
This Intuition chart explicitly identifies US men and US women, and directs Japanese sizing to its Mondo bands. These mappings apply to this chart only; the printed band is not a measured usable-space guarantee.
| Size | US men | US women | JP · source label | EU | UK | Nominal Mondo · mm | Printed Mondo / MP |
|---|---|---|---|---|---|---|---|
| Mondo 22–22.5 | 4–4.5 | 5–5.5 | 22–22.5 | 35.75–36.5 | 3–3.5 | 220–225 mm | 22–22.5 cm |
| Mondo 23–23.5 | 5–5.5 | 6–6.5 | 23–23.5 | 37–37.75 | 4–4.5 | 230–235 mm | 23–23.5 cm |
| Mondo 24–24.5 | 6–6.5 | 7–7.5 | 24–24.5 | 38.25–39 | 5–5.5 | 240–245 mm | 24–24.5 cm |
| Mondo 25–25.5 | 7–7.5 | 8–8.5 | 25–25.5 | 39.5–40.25 | 6–6.5 | 250–255 mm | 25–25.5 cm |
| Mondo 26–26.5 | 8–8.5 | 9–9.5 | 26–26.5 | 40.75–41.5 | 7–7.5 | 260–265 mm | 26–26.5 cm |
| Mondo 27–27.5 | 9–9.5 | 10–10.5 | 27–27.5 | 42–42.75 | 8–8.5 | 270–275 mm | 27–27.5 cm |
| Mondo 28–28.5 | 10–10.5 | 11–11.5 | 28–28.5 | 43.25–44 | 9–9.5 | 280–285 mm | 28–28.5 cm |
| Mondo 29–29.5 | 11–11.5 | 12–12.5 | 29–29.5 | 44.5–45.25 | 10–10.5 | 290–295 mm | 29–29.5 cm |
| Mondo 30–30.5 | 12–12.5 | 13–13.5 | 30–30.5 | 45.75–46.5 | 11–11.5 | 300–305 mm | 30–30.5 cm |
| Mondo 31–31.5 | 13–13.5 | 14–14.5 | 31–31.5 | 47–47.75 | 12–12.5 | 310–315 mm | 31–31.5 cm |
| Mondo 32–32.5 | 14–14.5 | 15–15.5 | 32–32.5 | 48.25–49 | 13–13.5 | 320–325 mm | 32–32.5 cm |
Current manufacturer page contains eleven nominal Mondo bands, even though descriptive copy says ten sizes. The page also says to size up on a half size, giving 27.5 to 28 as its example. Preserve that instruction next to the printed band; do not silently reinterpret the band as a measured-foot fit guarantee. This is the aftermarket Skate Premium, distinct from Skate V2 and OEM FR/THEM/Wizard versions.
Manufacturer lists compatible shell families, not every exact size pairing. Try the liner inside the intended shell, with the planned cuff, heel wedge and footbed, before molding.
[ SKATE CONNECTIONS ]
Documented packages & families
Published family references
These references do not establish fit for every shell size, generation or colorway. Check the specific pairing and source before choosing a liner.
- Faction Tactical V
- FR FRX
- FR FR3
- FR FR2
- FR FR1
- FR FRJ
- Flying Eagle Eclipse
- Flying Eagle Raven
- Flying Eagle Falcon
- Flying Eagle Origami
- Flying Eagle Mantra
- Gawds Tim Franken
- Iqon AG10
- Iqon AG20
- Iqon ACT
- Mesmer Jon Bolino
- Mesmer Eclipse
- Powerslide Imperial
- Powerslide Next
- Powerslide Zoom
- Roces 5th Element
- Roces M12
- Roces X35
- Roces Ego
- Roces Yep
- Rollerblade Twister
- Rollerblade Maxxum
- Rollerblade RB Cruiser
- Rollerblade Solo
- Rollerblade Fusion
- Rollerblade New Jack
- Rollerblade Blank
- Seba E3
- Seba CJ2 liner-less
- Salomon ST
- Standard Omni
- Them 909
- Them 908
- Them 901
- TNEC Twin
- TNEC 58
- USD Sway
- USD Aeon
- USD Throne
- USD UFS Throne
- USD Seven
[ FIT, FIXES & MODS ]
Liner swaps, lacing & fitting tools
An OEM package identifies where this liner was supplied, not the only skate it can fit. Explore other combinations with their evidence and size conditions kept visible.
Seat your heel, adjust the lower laces and cuff separately, and check your toes in skating posture before adding padding.
6 sourced Intuition options are available to review. General fitting aids need a trial fit; they are not verified shell pairings.
Model-specific references: Skate Premium Heel Wedge · Skate Premium Cuff Kit
[ LINER WORKSHOP ]
Heat molding & break-in
Named manufacturer timing is now linked below. Use its complete fitting instructions; this table does not authorize oven heating.
Heat molding · Maker procedure found
Applies to: Skate Premium only; other Intuition editions have separate requirements
These steps summarize the source. Read the complete maker instructions below before starting.
Method: Intuition home rice method; a separate professional K-Tech guide is linked.
Before you start
- Read the complete manufacturer instructions and model chart before starting.
- Test-fit with intended footbeds. Use the Fit Kit rubber toe cap, fitting stockings and specified uncooked rice.
- Remove footbeds, orthotics and shims; keep the liner inside its shell during rice warming.
Published procedure
- Warm only the rice stocking by the appliance table. Settle it into the liner’s toe and heel; leave it in contact for 5–7 minutes.
- Put the toe cap on the bare foot, logo over the big toe, then cover it with the second fitting stocking.
- Remove rice. Briefly remove the liner to restore the footbed, orthotic or shim, then return it to the shell and insert the prepared foot.
- Seat the heel and fasten neutrally. Stand still with even weight and toes raised 1–2 inches for 5–7 minutes. Remove the cooled boot, cap and stocking; repeat for the other liner.
- Do not mold a loose or clearly undersized fit. Intuition does not recommend or warrant oven heating.
- Rice warm-up differs from liner-contact time. Confirm an unclear printed microwave wattage band with Intuition.
- K-Tech Setting II belongs to the professional heater; its separate shop guide uses 5–10 minutes of cooling.
- Heat molding is optional; the maker also permits fitting through use.
Molding evidence checked 2026-10-20.
[ SOURCE FILES ]
Original references
- Intuition — Skate Premium specifications and compatible shells
- Intuition — Home Fitting instructions
- Intuition — replacement cuffs and heel wedges
- Intuition: model-specific heating times
- Intuition: Shop Fitting
Record checked 2026-10-20. The linked source may have changed since that check.
Submit a correction or exact-model source ↗ · Include the liner generation, size label and original photographer or source credit.
[ SAME MAKER ]
More from Intuition
Separate models and editions retain their own sizing and molding guidance.
Intuition / Current
FR UFR — revised Black-Black
Volume: Low
Wear-in / no heat required
[ OPEN RECORD ↗ ]Intuition / Current
FR UFR AP Pro — Sand Grey / Orange graphic
Volume: Unconfirmed
Heat molding unverified
[ OPEN RECORD ↗ ]


