Roces / Archive
Dogma Spassov Domestik Punk 2.0 stock
Volume: Unconfirmed
Heat molding unverified
[ OPEN RECORD ↗ ]Roces / LINER ARCHIVE / Current
Roces RL2 adds reinforced tongue and handle stitching, more padding, and an ankle area without the earlier stitching. The dual-density liner has a neoprene/Lycra lower section and heel-retention lacing.

[ THE RECORD ]
Recorded uses: M12 liner upgrade trials / Roces shell-specific sizing
Also listed as: RL2
[ FIT NOTES ]
The RL2 nominal Mondo table belongs only to RL2. Its M12 and Fifth Element shell sizes are listed separately; they are not interchangeable.
[ FIT REFERENCE ]
Heel seating, lacing & fitting accessories →
Start with your actual foot measurements. Use the chart for the exact skate, generation and liner package you intend to buy.
| What you see | What to check |
|---|---|
| Foot length · mm / cm / inches | These are measurements, not shoe sizes. 288 mm = 28.8 cm. One inch is 25.4 mm. Keep both feet separately and use the longer one. |
| MP / Mondo / CM / JP | Preserve the manufacturer’s printed units and meaning. A nominal size label is separate from a recommended foot-length column. A number such as 28.5 must not be mistaken for 28.5 mm. |
| US men / US women / youth | These are different scales. A generic “US” entry stays unspecified unless its source identifies the scale. Unisex marketing does not establish which scale the seller uses. |
| EU / UK / regional labels | Read the exact chart’s column. Do not apply a universal conversion from everyday shoes or another skate brand; ask the seller which scale an unlabeled number uses. |
| Dual sizes / shared shells / XS–XL | Two retail sizes can share one shell while their liners or inserts differ. Letter sizes and names such as Shmedium belong to that model’s chart. Check the shell stamp and liner label separately. |
| Junior / adjustable skates | A labeled size range is not automatically a measured foot range. Verify the exact adjustable model, its current setting and any supplied sizing insert. |
| Shell / liner / insole dimensions | Empty-shell length and width, liner interior length and insole length are different measurements. None alone tells you how much usable room your foot has in the assembled skate. |
Check forefoot width, instep height, heel hold, socks and footbeds too. Width and instep entries are saved for fitting discussions; the Archive does not invent wearable volume limits. Used liners, replacement liners and different packages need their own review.
Only apply an allowance when the exact chart instructs it. A chart adjustment changes that chart lookup, not your saved foot measurements or the rest of the app. Do not add extra room twice or assume every half size uses a different shell.
FR model-specific sizing ↗ · Intuition size scales ↗ · THEM shell labels ↗ · Razors shell dimensions ↗
Enter both feet; the finder uses the longer measurement.
Regional labels are copied from this source. A generic US label does not establish a men’s, women’s or youth scale. Printed MP/CM is kept separate from measured foot length; no universal conversion is applied.
| Size | US · source label | EU | UK | Nominal Mondo · mm | Printed Mondo / MP |
|---|---|---|---|---|---|
| S | 6–7 | 39–40 | 5–6 | 255 mm | 255 mm |
| M | 8–9 | 41–42 | 7–8 | 270 mm | 270 mm |
| L | 10–10.5 | 43–44 | 9–9.5 | 280 mm | 280 mm |
| XL | 11–12 | 45–46 | 10–11 | 295 mm | 295 mm |
| XXL | 13–15 | 47–49 | 12–14 | 308 mm | 308 mm |
The source labels these values Mondopoint. They are kept as nominal labels, not a guaranteed foot-fit range or a liner-interior measurement.
M12 and Fifth Element use different shell-label mappings. Check the matching family table and actual liner label.
[ PUBLISHED PAIRINGS ]
These are the source’s liner and shell labels. They are not measured-foot ranges.
| Liner size | Shell size |
|---|---|
| S | UK 5/6 |
| M | UK 7/8 |
| L | UK 9/9.5 |
| XL | UK 10/11 |
| XXL | UK 12/13/14 |
| Liner size | Shell size |
|---|---|
| M | UK 5/6 |
| L | UK 7/8 |
| XL | UK 9/9.5 |
| XXL | UK 10/11 |
Loco supplies the XXL Fifth Element pairing omitted from the SkatePro table. Verify the actual shell stamp before purchase.
[ SKATE CONNECTIONS ]
These references do not establish fit for every shell size, generation or colorway. Check the specific pairing and source before choosing a liner.
[ FIT, FIXES & MODS ]
An OEM package identifies where this liner was supplied, not the only skate it can fit. Explore other combinations with their evidence and size conditions kept visible.
Seat your heel, adjust the lower laces and cuff separately, and check your toes in skating posture before adding padding.
A maker-specific accessory list has not been verified for this liner yet. The workshop explains the fitting checks without assuming another model’s replacement parts will fit.
[ LINER WORKSHOP ]
Roces confirms heat-moldable padding, including in the new Inferno 2.0 packages. The RL2 product page and current manual index did not supply an RL2-specific procedure; the RL1 rice method is not assigned to RL2.
Applies to: RL2 Black/White, including the explicitly named Inferno 2.0 packages.
Molding evidence checked 2026-10-20.
[ SOURCE FILES ]
Record checked 2026-10-20. The linked source may have changed since that check.
Submit a correction or exact-model source ↗ · Include the liner generation, size label and original photographer or source credit.
[ SAME MAKER ]
Separate models and editions retain their own sizing and molding guidance.
Roces / Archive
Volume: Unconfirmed
Heat molding unverified
[ OPEN RECORD ↗ ]Roces / Archive
Volume: Unconfirmed
Heat molding unverified
[ OPEN RECORD ↗ ]Roces / Archive
Volume: Unconfirmed
Heat molding unverified
[ OPEN RECORD ↗ ]