Standard / LINER ARCHIVE / Archive
Standard Omni Comfort — original
Original Omni Comfort liner has a flexible neoprene toe, locking elastic laces and a heat-moldable cuff. Its fit should not be assumed identical to Comfort V2.

[ THE RECORD ]
Volume, support & construction
- Brand
- Standard
- Catalog status
- Archive
- Volume
- Unconfirmed
- Support
- Plush cuff with heel-retention padding.
- Heat claim
- Padding — creator-documented heat molding
- Pairing evidence
- Manufacturer-listed
Recorded uses: Original Omni restoration
[ FIT NOTES ]
Size labels & fit
Original Comfort has four listed sizes, Small through X-Large. Later X-Small sizing is not inherited.
[ FIT REFERENCE ]
Sizing & Mondo
Heel seating, lacing & fitting accessories →
Make sense of skate sizes · mm, Mondo, US, EU, UK & shell sizes
Start with your actual foot measurements. Use the chart for the exact skate, generation and liner package you intend to buy.
| What you see | What to check |
|---|---|
| Foot length · mm / cm / inches | These are measurements, not shoe sizes. 288 mm = 28.8 cm. One inch is 25.4 mm. Keep both feet separately and use the longer one. |
| MP / Mondo / CM / JP | Preserve the manufacturer’s printed units and meaning. A nominal size label is separate from a recommended foot-length column. A number such as 28.5 must not be mistaken for 28.5 mm. |
| US men / US women / youth | These are different scales. A generic “US” entry stays unspecified unless its source identifies the scale. Unisex marketing does not establish which scale the seller uses. |
| EU / UK / regional labels | Read the exact chart’s column. Do not apply a universal conversion from everyday shoes or another skate brand; ask the seller which scale an unlabeled number uses. |
| Dual sizes / shared shells / XS–XL | Two retail sizes can share one shell while their liners or inserts differ. Letter sizes and names such as Shmedium belong to that model’s chart. Check the shell stamp and liner label separately. |
| Junior / adjustable skates | A labeled size range is not automatically a measured foot range. Verify the exact adjustable model, its current setting and any supplied sizing insert. |
| Shell / liner / insole dimensions | Empty-shell length and width, liner interior length and insole length are different measurements. None alone tells you how much usable room your foot has in the assembled skate. |
Length is the first check.
Check forefoot width, instep height, heel hold, socks and footbeds too. Width and instep entries are saved for fitting discussions; the Archive does not invent wearable volume limits. Used liners, replacement liners and different packages need their own review.
Only apply an allowance when the exact chart instructs it. A chart adjustment changes that chart lookup, not your saved foot measurements or the rest of the app. Do not add extra room twice or assume every half size uses a different shell.
FR model-specific sizing ↗ · Intuition size scales ↗ · THEM shell labels ↗ · Razors shell dimensions ↗
Standard Comfort V1 / original — published cm reference
Size verification required
Automatic matching is paused for this reference. Read the chart notes and confirm the exact shell and liner with the manufacturer or a specialist.
Regional labels are copied from this source. A generic US label does not establish a men’s, women’s or youth scale. Printed MP/CM is kept separate from measured foot length; no universal conversion is applied.
| Size | US · source label | EU | UK | Nominal Mondo · mm | Printed Mondo / MP |
|---|---|---|---|---|---|
| Small | 6/7 | 39/40 | — | 261 mm | 26.1 cm |
| Medium | 8/9 | 41/42 | — | 272 mm | 27.2 cm |
| Large | 10/10.5 | 43/44 | — | 285 mm | 28.5 cm |
| X-Large | 11/12 | 45/46 | — | 300 mm | 30.0 cm |
This exact loose-liner listing prints a cm sizing guide without identifying it as foot length, insole length or liner inside length. It is retained as a nominal cm reference, not a measured-foot guarantee. The original has four sizes; V2 and V3 add X-Small. Every edition was checked separately.
Check the exact liner label and its fit inside the intended shell. These numbers do not prove the compatibility of an unlisted shell.
[ SKATE CONNECTIONS ]
Documented packages & families
Published family references
These references do not establish fit for every shell size, generation or colorway. Check the specific pairing and source before choosing a liner.
- Standard Omni
[ FIT, FIXES & MODS ]
Liner swaps, lacing & fitting tools
An OEM package identifies where this liner was supplied, not the only skate it can fit. Explore other combinations with their evidence and size conditions kept visible.
Seat your heel, adjust the lower laces and cuff separately, and check your toes in skating posture before adding padding.
2 sourced Standard options are available to review. General fitting aids need a trial fit; they are not verified shell pairings.
Open the fit workshop for Standard Omni Comfort — original →
[ LINER WORKSHOP ]
Heat molding & break-in
The manufacturer’s Comfort support instructions are recorded below, with their current source-availability limitation.
Heat molding · Maker procedure found
Applies to: Original Comfort liner: creator describes moldable padding around and below the ankle; plastic boot excluded.
These steps summarize the source. Read the complete maker instructions below before starting.
Method: Manufacturer Comfort support guide; oven-off method
Before you start
- Remove the Comfort liners from the boots and put them on a baking sheet.
Published procedure
- The guide lists 170°F / 75°C preheat. Turn the oven off before placing the sheet on its bottom rack.
- Warm the liners for 15 minutes, return them to the boots, fasten normally and sit for 20 minutes while they cool.
- Keep the plastic boots out of the oven.
- The support page was recovered from its search index; the live URL returned unavailable during this check. Confirm edition instructions before use.
- The documented customization concerns liner padding; it does not establish that every component can be molded.
Molding evidence checked 2026-10-20.
[ SOURCE FILES ]
Original references
- Roller Warehouse — original Omni Comfort
- Standard — original liner and shell sizing context
- Standard / Balance — V1 / original Comfort liner and size guide
- Standard: Comfort liner support guide (indexed; live page unavailable on check)
- Lawrence Ingraham / Back to Blading: original Omni fitting, 7 March 2024
Record checked 2026-10-20. The linked source may have changed since that check.
Submit a correction or exact-model source ↗ · Include the liner generation, size label and original photographer or source credit.
[ SAME MAKER ]
More from Standard
Separate models and editions retain their own sizing and molding guidance.
Standard / Preorder
V3 SB Comfort — crocodile texture
Volume: Unconfirmed
Heat listed · method needed
[ OPEN RECORD ↗ ]

