Skip to content
AGGRESSIVE
ARCHIVE
[ ARCHIVE / BUILD / COLLECT ]
How to use AABrowse archive →

AGGRESSIVE ARCHIVE / FIT, FIXES & MODS

Dial in the fit.

The right size is the starting point. Get your heel seated, your laces working and your toes comfortable—then choose fitting tools for the setup you actually skate.

Related pages and community
[ ON THE BENCH ] MYFIT 2nd Skin Medium (original)Back to liner ↗Browse all fitting tools →

01 / BEFORE BUYING ANOTHER PAD

Get the basics feeling right.

HEEL / LACES / TOES
HEEL SEATEDTOES RELAXEDCHECK BOTH FEETAA / FIT STUDY 01 · SCHEMATIC

STEP 1 / 04

Start at the back.

Open the laces and closures enough to enter without folding the tongue. Smooth your skating socks and settle the heel into its pocket. If your boot has a 45° instep strap, secure it with knees flexed so the heel stays rearward.

The cuff should not do all the work of holding your heel.

Read the original: Powerslide · fitting tips ↗

Original Archive diagrams, informed by manufacturer guidance. Closure layouts vary by skate. Keep size allowances and heat-molding instructions specific to your exact model.

02 / DIFFERENT LINER. DIFFERENT FEEL.

Explore a liner swap.

Less padding can change the room around your foot. Toe shape, tongue thickness, heel hold and cuff height matter too. A liner cannot make a hard shell longer.

Made for a skate ≠ only fits that skate.

An original-package record tells you where a liner was supplied. It does not rule out other shells. An undocumented swap stays open to investigation; it is neither a confirmed fit nor automatically incompatible.

What the evidence labels mean
Original package
Documented factory or named package. Correct shell and liner sizes still matter.
Published family
A source names a shell family. It does not verify every generation or size.
Published size combination
A source records foot range, shell, liner and conditions. Only those exact conditions apply.
Shop advice / rider report
Useful fitting experience, separate from manufacturer approval. One person’s fit does not guarantee yours.
Not documented
The archive lacks pairing evidence. A useful design feature alone cannot certify the combination.

Start with your exact shell. · Current liner: MYFIT 2nd Skin Medium (original)

Choose a boot in the builder →These are features to compare, not recommendations calculated from your foot measurements. Builder compatibility keeps its own exact-part checks.

13 documented liner guides

Intuition / Specialist shop

Skate V2 ↗

Low-volume midfoot construction makes V2 worth comparing when padding crowds the foot. Its toe shape and dense foam still need their own check.

Check before swapping: A thinner midfoot does not guarantee a roomier toe box or a fixed millimetre gain. V2 letter sizes are not Premium size bands.

Included fit adjustments & pairing evidence

Use the exact V2 record for its cuff, footbed and molding references.

The shop names THEM, Roces, Razors and USD hard shells broadly. This is shop advice, not maker approval or an exact size matrix.

No shell selected

Changes to the liner do not establish foot fit or change assembly compatibility automatically.

Intuition / Manufacturer

Skate Premium ↗

Dual-density construction with a softer toe area, reinforced tongue and removable cuff reinforcement.

Check before swapping: Premium is not automatically thinner than V2. Check liner size, shell volume and heel hold together.

Included fit adjustments & pairing evidence

Cuff reinforcement and 8 mm heel wedge are already included.

Intuition lists M12, 5th Element, THEM 908/909/901, USD Aeon/Sway/Thrones/Seven, Omni and more. SEBA CJ2 is specifically liner-less. Family guidance is not a size guarantee.

No shell selected

Changes to the liner do not establish foot fit or change assembly compatibility automatically.

MYFIT / Manufacturer

2nd Skin Black ↗

The black 908459 revision targets limited padding space with a stretch toe and adjustable heel support.

Check before swapping: Black and White use different size groups. Do not transfer charts or resolve the recorded heating conflict by guessing.

Included fit adjustments & pairing evidence

Molded EVA tongue and adjustable heel support.

Construction evidence; exact alternate-shell size pairing not established.

No shell selected

Changes to the liner do not establish foot fit or change assembly compatibility automatically.

MYFIT / Manufacturer

2nd Skin White ↗

The white 908454 revision uses thin padding and a stretch toe for limited-space fitting.

Check before swapping: Its EU 38–39 onward size groups differ from Black 908459. Compare the exact label and source chart.

Included fit adjustments & pairing evidence

Check this revision’s heel support and fitting instructions.

Construction evidence; exact alternate-shell size pairing not established.

No shell selected

Changes to the liner do not establish foot fit or change assembly compatibility automatically.

MYFIT / Manufacturer

2nd Skin Sam Crofts Pro ↗

Crofts describes a thin neoprene toe area with heel support, specifically naming Aeon and Next.

Check before swapping: This is the 908416 2nd Skin edition, not Prime Sam Crofts or every Aeon OEM liner.

Included fit adjustments & pairing evidence

Recall insole and reinforced heel.

Maker-hosted rider recommendation for USD Aeon and Powerslide Next; no exact shell-size pairing table.

No shell selected

Changes to the liner do not establish foot fit or change assembly compatibility automatically.

MYFIT / Manufacturer

Prime ↗

Removable cuff reinforcement and heel padding offer ways to tune support and stance.

Check before swapping: Extra support can occupy space. Prime is not a default fix for a crowded toe box or instep.

Included fit adjustments & pairing evidence

Removable cuff reinforcement and heel pad; inspect what is already installed.

Construction evidence; exact alternate-shell size pairing not established.

No shell selected

Changes to the liner do not establish foot fit or change assembly compatibility automatically.

Roces / Manufacturer

RL1 — first version ↗

The first RL1 uses slim neoprene/Lycra construction, ankle shaping and Tri-Hold retention lacing.

Check before swapping: Keep first-version RL1 separate from RL1 V2 and RL2. General foot size and shape must already suit the liner before molding.

Included fit adjustments & pairing evidence

Tri-Hold lacing and grip surfaces; no separate RL1 fitting-kit catalog verified.

Construction evidence; exact alternate-shell size pairing not established.

No shell selected

Changes to the liner do not establish foot fit or change assembly compatibility automatically.

Reign / Brand distributor

V3 Camo ↗

Neoprene toe, shaped tongue, heel grip patch and tri-lacing provide several fit features to compare.

Check before swapping: A stretch toe is not proof that a shell is long enough. Do not copy the Camo size chart to every V3 edition.

Included fit adjustments & pairing evidence

Heel grip and tri-lacing; no separate fitting-pad SKU or molding procedure verified.

Construction evidence; exact alternate-shell size pairing not established.

No shell selected

Changes to the liner do not establish foot fit or change assembly compatibility automatically.

Reign / Brand distributor

V3 HT Black/White ↗

HT raises the Achilles opening and adds ankle and tongue padding for higher cuffs.

Check before swapping: HT is not universally thinner than V3. Added ankle or tongue material may make a tight setup more crowded.

Included fit adjustments & pairing evidence

Neoprene toe, heel patch and tri-lacing; no exact heating procedure verified.

Construction evidence; exact alternate-shell size pairing not established.

No shell selected

Changes to the liner do not establish foot fit or change assembly compatibility automatically.

Rollerblade / Manufacturer

Blank liner — 09202M00100 / PSI Plus ↗

Exact SKU 09202M00100 includes a stretch toe, silicone heel strips and integrated lacing.

Check before swapping: Keep this PSI Plus model separate from the older Blank V2/CAS liner. No molding permission verified for this exact record.

Included fit adjustments & pairing evidence

PSI Plus footbed and Footboard Sizer are included. Check the existing stack before adding another layer.

Construction evidence; exact alternate-shell size pairing not established.

No shell selected

Changes to the liner do not establish foot fit or change assembly compatibility automatically.

Echo / Manufacturer

Hygge 1.0 ↗

Hygge 1.0 has movable side pressure patches, an anti-slip heel patch and top lacing.

Check before swapping: Heat-stamped construction does not authorize heat molding. Additional padding or heel height changes available space.

Included fit adjustments & pairing evidence

Hook-and-loop heel raisers and shock absorbers, slim insole and adjustable patches; not a separately verified accessory kit.

Construction evidence; exact alternate-shell size pairing not established.

No shell selected

Changes to the liner do not establish foot fit or change assembly compatibility automatically.

Standard / Brand distributor

Omni Comfort V3 ↗

Standard describes more internal room while filling the Omni shell, with a padded toe and lift-resistant heel padding.

Check before swapping: That description is not a measured clearance gain. The moldable-cuff claim does not establish an all-component heating recipe.

Included fit adjustments & pairing evidence

Locking elastic laces and grip tread. Omni V3’s stock heel pad belongs to the shell setup.

Construction evidence; exact alternate-shell size pairing not established.

No shell selected

Changes to the liner do not establish foot fit or change assembly compatibility automatically.

SEBA / Manufacturer

Foryos CJ Prime — Black ↗

A removable replacement liner for the CJ2 Prime shell setup.

Check before swapping: Do not treat integrated-liner CJ versions as removable-liner Prime boots. Alternate-brand size pairings are not documented here.

Included fit adjustments & pairing evidence

Check the exact loose-liner dimensions and intended footbed in the record.

Construction evidence; exact alternate-shell size pairing not established.

No shell selected

Changes to the liner do not establish foot fit or change assembly compatibility automatically.

A published example: V2 / Premium in Wizard’s SEBA setup

Wizard’s Comfort Fit chart provides the following examples. Both aftermarket-liner columns specify cuff wrap removed. Use the complete source for shell version, fit preference and other rows.

Wizard Comfort Fit · conditions apply
Foot lengthSEBA carbon / plastic shellV2Premium
250–255 mm40 / 40Small25–25.5
265–270 mm42 / 42Medium26–26.5

These rows do not authorize the same pairing in any shell stamped 40 or 42. They are not new automatic builder approvals.

Wizard’s full fit chart ↗

Keep a useful fit report.

Record the exact boot generation and shell stamp, liner model and size, both foot measurements, socks, insole and heel-pad setup. Compare toe pressure and heel movement with the same stance and closures. A roomier toe box is not a good trade if your heel becomes loose.

Save the result in your build notes. When sharing in the forum, label it as your own fit experience and include those details.

03 / THE FITTING BENCH

What needs adjusting?

Check my measurements ↗
START HERE / Start with your measured feet, the exact model chart and the liner already inside your skate. Change one thing at a time, then check both feet again.

7 documented options for review with this liner · checked 06 Nov 2026

Fitting aids need a personal trial fit. Model-specific replacements keep their stated limits. Manufacturer links show current buying options; these cards do not claim live prices, stock or compatibility with every skate.

MYFIT / 908287Fit addition

Footies Heel Lock · 2 mm

A foot-worn 2 mm sleeve with 3 mm SPC padding behind the Achilles for heel hold.

FIT CHECK / Adds volume around the foot. Check the sleeve and closed skate together; no exact shell/liner pairing is established.

EU XS 31–34 / S 34–37 / M 37–40 / L 40–43 / XL 43–46

Product & fitting details ↗
MYFIT / 908285Fit addition

Footies Donut · 2 mm

A 2 mm sleeve with a 3 mm SPC ring around the ankle area for targeted padding.

FIT CHECK / Extra bulk changes fit. This does not resolve a shell that is too small.

EU XS 31–34 / S 34–37 / M 37–40 / L 40–43 / XL 43–46

Product & fitting details ↗
MYFIT / 908217Fit addition

Gel Heel Pad

PU gel cushioning beneath the heel.

FIT CHECK / Changes heel height. Recheck ankle position, heel retention and space above the foot.

EU S 36–39 / M 40–43 / L 44–47

Product & fitting details ↗
MYFIT / 908264Fit addition

Skatesole ¾

Molded EVA support and cushioning at the heel and arch, leaving the forefoot uncovered.

FIT CHECK / Compare with your existing insole. It does not lengthen the boot or promise a measured clearance gain.

EU S 38–40 / M 41–43 / L 44–46

Product & fitting details ↗
MYFIT / 908260Fit addition

Arch Support

Adhesive gel pads placed beneath the liner insole; marketed by MYFIT for low arches.

FIT CHECK / Check arch shape and remaining instep space. Not an automatic choice for every arch or pressure complaint.

One size; individual positioning required

Product & fitting details ↗
MYFIT / 908471Fit addition

Foot Cush

Dual-density cushioning with shaped arch and heel support.

FIT CHECK / Compare with the original footbed before stacking layers. Thickness and exact liner pairings are not verified.

EU 36–38 / 39–40 / 41–42 / 43–44 / 45–48

Product & fitting details ↗
MYFIT / 940482Replacement part

Waxed Laces Pro Black

Flat 8 mm waxed laces help retain adjusted tension.

FIT CHECK / Match lace length and routing to your boot. No universal lace length follows from shoe size.

140 / 160 / 180 / 200 cm

Product & fitting details ↗

04 / MOLDING IS ITS OWN STEP

Know what goes on—and when.

Intuition C/L pads go outside the liner after molding. Pre-cut fit foam and toe caps are fitting tools used during an approved procedure. They are not interchangeable.

Use the exact liner record for molding permission, method and source. Intuition does not recommend oven heating. Never carry a MYFIT recipe across to an Intuition liner or a related OEM model.

Open this liner’s molding guide ↗

KEEP THE ORIGINALS CLOSE

Powerslide · fitting tips ↗Powerslide · posture & toe clearance ↗MYFIT · fitting tips ↗Powerslide · fitting problems ↗Intuition · home fitting ↗Intuition · shop fitting ↗Sources reviewed 2026-11-06. Maker-specific guides, included adjustments and separately documented accessories are kept distinct. Additional liner models, historical accessories and exact swap combinations still need evidence.